Grizzly Riding Toy G7112 User Manual

HEAVY-DUTY WAGON WITH  
WOOD SIDES  
MODEL G7112  
INSTRUCTION SHEET  
COPYRIGHT © MARCH, 2004 BY GRIZZLY INDUSTRIAL, INC.  
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE  
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.  
#6184 PRINTED IN CHINA  
 
ASSEMBLY INSTRUCTIONS  
WOOD STAKE SIDES & PULL HANDLE  
1. Turn the wagon right side up.  
2. Mount the left and right rear wood stake sides  
to the outside of the bed with M6-1.0 x 45 slot  
head screws, flat washers, and acorn nuts,  
as shown in Figure 3.  
FRONT SUPPORT ASSEMBLY  
1. Attach the steering bracket to the front axle  
assembly with the special bolt, 10mm flat  
washer, and hex nut. Insert the cotter pin  
through the hole of the special bolt, and  
spread. Do not overtighten.  
2. With the bed upside down, mount the steer-  
ing bracket to the bed with four M6-1.0 flat  
head screws, flat washers, lock washers,  
and hex nuts. Figure 2 shows the steering  
bracket preperly mounted to the bed.  
Figure 3. Wood stake side mounted to the out-  
side of the bed.  
3. Mount the front wood stake side to the out-  
side of the bed with M6-1.0 x 45 slot head  
screws, flat washers, and acorn nuts.  
4. Mount the rear wood stake side to the outside  
of the bed with M6-1.0 x 45 slot head screws,  
flat washers, and acorn nuts.  
5. Using the M6-1.0 x 75 slot head screw, M6-  
1.0 hex nut, flat washer, and lock washer,  
attach the pull handle with the to the opening  
in the front axle support.  
Figure 2. Steering bracket and front axle assem-  
bly mounted to the bed.  
REAR AXLE ASSEMBLY & WHEELS  
1. Loosely mount the rear axle support to the  
bed using two M6-1.0 x 16 flat head screws,  
flat washers, lock washers, and hex nuts.  
2. Slide the rear axle braces onto the rear axles  
and bolt the opposite ends of the braces to  
the bed using the remaining M6-1.0 x 16 flat  
head screws, flat washers, lock washers, and  
hex nuts.  
If you need additional help with this procedure,  
call our service department at: (570) 546-9663.  
3. Tighten the rear axle support.  
4. Slide a wheel onto each axle with the valve  
stems to the outside.  
5. Insert and spread a cotter pin into each  
axle, and place the plastic axle caps into the  
axles.  
 
G7112 Parts Breakdown and List  
6
12  
5
22  
25  
7
1
11  
8
14  
22  
26  
9
18  
3
15  
4
2
17  
21  
13  
23  
16  
15  
17  
20  
22  
18  
REF  
1
PART#  
DESCRIPTION  
BED  
REF  
14  
15  
16  
17  
18  
20  
21  
22  
23  
25  
26  
PART#  
DESCRIPTION  
P7112001  
P7112002  
P7112003  
P7112004  
P7112005  
P7112006  
P7112007  
P7712008  
P7112009  
PFH38M  
PS83M  
P7112014  
PN01M  
SPECIAL BOLT M10-1.5 x 23  
HEX NUT M6-1  
2
PULL HANDLE  
TIRES 4.10/3.50  
PN02M  
HEX NUT M10-1.5  
3
P7112017  
PLW03M  
PW08M  
PW04M  
PW03M  
P7112023  
PN35M  
COTTER PIN 3/32 x 1-1/2  
LOCK WASHER 6MM  
FLAT WASHER 16MM  
FLAT WASHER 10MM  
FLAT WASHER 6MM  
PLASTIC AXLE CAP  
ACORN NUT M6-1  
4
FRONT AXLE ASSEMBLY  
L/R WOOD STAKE SIDE  
REAR WOOD STAKE SIDE  
5
6
7
FRONT WOOD STAKE SIDE  
REAR AXLE ASSEMBLY  
REAR AXLE BRACE  
8
9
11  
12  
13  
FLAT HD SCR M6-1 x 16  
PHLP HD SCR M6-1 x 45  
PHLP HD SCR M6-1 x 75  
P7112026  
STEERING BRACKET  
PS84M  
 

Graco Marine Heating System 309524N User Manual
Haier Flat Panel Television 15HL25S User Manual
Harbor Freight Tools Automobile Parts 90402 User Manual
Harbor Freight Tools Nail Gun 68021 User Manual
Honeywell Fan HS 160R User Manual
Honeywell Ventilation Hood HR230 User Manual
Hotpoint Electric Pressure Cooker H151EWH User Manual
Husqvarna Trimmer 968999515 User Manual
Ice O Matic Ice Maker ICE0400A3 T3 W3 User Manual
IDEAL INDUSTRIES Paper Shredder IDEAL 5009 1 User Manual